 | Lightweight Tranny Case 1deg
$60.00 |
| Made in the USA Machined from billet 6061 aluminum Lightweight design Works great for racing Now includes FLM20700 Motor Guard Includes everything pictured plus all mounting hardware 1 degree toe in arm mounts Requires slight mod to stock Rustler chassis Weighs 100 grams |
 | Sealed Diff
$45.00 |
| Made in the USAMachined from billet 7075 aluminum.Hardened steel gear.Adjustable fluid filled diff.O-rings have been machined on each surface to prevent fluid loss. |
 | Lightweight Tranny Case 4deg
$60.00 |
|
Made in the USA
Machined from billet 6061 aluminum
Lightweight design
Works great for racing
Now includes FLM20700 Motor Guard
Includes everything pictured plus all mounting hardware
4 degree toe in arm mounts (works best for racing)
Requires slight mod to stock Rustler chassis
|
 | Rear Adjustable Arm Mount 1 deg
$15.00 |
| Made in the USACNC Machined from billet 6061 aluminum1 degree toe inStock replacement for nitro, also for FLM tranny case |
 | Rear Adjustable Arm Mount 4 deg
$15.00 |
| Made in the USACNC Machined from billet 6061 aluminum4 degree toe inStock replacement for nitro, also for FLM tranny case |
 | Extended Chassis
$50.00 |
| Made in the USACNC Machined from billet 6061 aluminumStock replacement6.35mm thick25.4mm longer than stockIncludes all necessary mounting hardware |
 | Extended 1/8 Super Chassis
$55.00 |
|
Made in the USA
CNC Machined from billet 6061 aluminum
Stock replacement
8.25mm thick
50.8mm longer than stock
Includes all necessary mounting hardware
|
| | Stampede Chassis Braces
$35.00 |
|
Made from aircraft quality aluminum for durability and strength.
CNC Machined for exact tolerances
Strengthens Chassis
Enhances looks
Machined for our super chassis only
|
 | E Rear Shock Tower
$24.00 |
| Made in the USACNC machined from billet 6061 aluminumStock replacement6.35 thick for extreme dutyMultiple shock positionsWing mount compatibleIncludes all necessary mounting hardware |
 | Extended Front Arms
$20.00 |
| Made in the USACNC Machined from billet 6061 aluminumAdjustable widthExtended .320 and .500 for the ultimate in handling: pin to pin 3.05 & 3.225 inchesExtra shock positionsLightweightDurableRedesigned geometry |
 | Front Bulkhead
$27.00 |
| Made in the USAMade from billet 6061 aluminumSolid one piece unitLightweight designDurableDirect replacementAll mounting hardware included |
 | Front Skid Plate
$8.00 |
|
Made in the USA
Machined from billet 6061 aluminum
3.2mm thick
Direct replacement
|
 | Camberlink Kit (E Stampede)
$9.00 |
| Machined from aircraft grade aluminum tubingSuperior strengthKit includes all camber links to fit FLM24800 arm kit |
 | Extended Arm Conversion
$56.00 |
| Made in the USACNC Machined from billet 6061 aluminumMultiple shock mount locationsRecquires appropriate camber link kit for your applicationIncludes new hinge pinsPip to pin front 3.05 and 3.225 : rear 4.005 inchesAll necessary mounting hardware included |
 | Camberlink Kit (E Stampede)
$9.00 |
| Machined from aircraft grade aluminum tubingSuperior strengthCamber link kit for FLM24900 arm kit |
 | Front Shock Tower
$15.00 |
|
Made in the USA
CNC machined from billet 6061 aluminum
Stock replacement
6.35 thick for extreme duty
Multiple shock positions
Includes all necessary mounting hardware
|
 | Rear Arm (Electric)
$24.00 |
| Made from aircraft quality aluminum for durability and strength.CNC Machined for exact tolerancesMultiple shock mount locationsArm weight 28 grams - stock arm 21 gramsPin to pin length 3.63 inches |
 | Electric Arm CVD Kit
$48.00 |
|
Machined from high strength alloy
Heat treated for maximum strength
Lightweight design (lightest cvd on the market)
Lifetime warranty
Maximum travel drive cups
Stock replacement for Slash 4X4 Rear Arm, E Rustler and E Stampede
Fits FLM24800 arm kit and FLM26500 arm
|
 | Electric Exteneded Rear Arms
$24.00 |
| Made in the USAMachined from 6061 aluminumMultiple shock mounting positionsGreat handling upgradeRecquires longer turnbucklesPIn to Pin 4.005 inches |
 | Ext Arm CVD
$48.00 |
| Machined from high strength alloy steelLifetime warrantyFits FLM24900 arm kit |
 | Rear Bearing Carriers
$18.00 |
|
Made in the USA
Machined from billet 6061 aluminum
Includes all necessary hardware for an easy installation
Uses 11x5x4mm bearing
|
 | Electric Caster Block
$18.00 |
|
Machined from billet 6061 aluminum
Stock replacement
Recquires modification to stock arm (needs to be drilled to 1/8") direct fit with FLM arms.
|
 | CVD Install
$0.00 |
| Basic CVD Install |
