Mod1 Super Tranny w/ Arm Mounts & HD top shaft

Kit includes:

• Super Trans Case
• Mod1 HD top shaft
• Mod1 Super Diff 
• Mod1 Idler Gear
• Arm Mounts - Choose Option Below
• Hardware
• 2 - 5 x 10 x 4 Bearings (Idler Gear)
• 2 - 5 x 12 x 4 Bearings (Top Shaft)
• 1 - 5 x 11 x 4 Bearing (Top Shaft)
• 2 - 10 x 15 x 4 Bearings (Diff Gear)

This tranny was designed with the racer in mind. By designing the tranny with this mentality, we knew the tranny would need to be lightweight, wear resistant and able to adapt for varying conditions.

Some key features:

• All NEW Steel Diff Gears
• 1 Year warranty on gears- WARRANTY WILL ONLY COVER WEAR ON GEARS & TO THE ORIGINAL PURCHASER
• Hardcoat Anodized diff. This finish is very hard and wear resistant. It has a teflon seal for lubricity. Extremely light for the ultimate power transfer.
• Heavy Duty Motor Mount. We beefed up the motor mount to 5mm thick. The added thickness reduces bending and motor flex. Also acts as a heatsink to dissipate heat. (all good stuff)
• Replaceable arm mounts. With the ability to change arm mounts you have options with toe in and fighting against wear. Part is also compatible with Traxxas Nitro Rustler arm mounts.
• Necessary Parts - Traxxas part #6882 or 6882x. 
• Requires modifications to Stock Chassis

Notes on install:

Diff does not accept the XO1 metal cross brace, it is not necessary in our diff.

We prefer the stock cross pin over what is available to us. The pin will

need to be modified by grinding small chamfers on each end,

this will allow the pin to float freely in the diff.